Electronic Access Control System Integrated RFID With ID 38mA Reader Electric Single Double head Gate 12V Door 350mA Lock 95

Electronic Access Control System Integrated RFID With ID 38mA Reader Electric Single Double head Gate 12V Door 350mA Lock 95
  • Продавецguaranteedautos.us
  • Список ценUS $32.98piece
  • Продажная ценаUS $32.98piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,6 (538)

Oписание продукта

Automatic swing gate opener motors for 300kg gate 
 

SWING GATE OPENER TECHNICAL PARAMETERS

 

Input Voltage:   24VDC 40W
Rotational Speed:250RPM
Rod\'s Running Speed:1.6cm/s
Rod\'s Max Travel:300mm
Continue running time: 5min
Max Single-leaf Length:2.5m*2
Travel Max Single-leaf Weight:300KG
GEnvironment Temperature:-40°C~+55°C
Protection Calss:IP55
Functions and testing:
    1. Indicator LED light: It’s always on once the system electrified. LED indicator for “auto-closing”flashes every 1second. It turns off when enter into the learning code state or removing code state; it flashes twice after successfully learning code or removing code.
2. Transmitter : using our company own customed rolling code. Singe-leaf button controls opening and closing of MOTOR2, double-leaf button simultaneously controls
opening and closing of MOTOR1 & MOTOR2. The control panel can memorize 20 transmitters at most.
3. Code-learning: press and hold learning button for 1second then release, LED turns off and press any button of transmitter, then LED flashes twice, now the codes has been learnt to the panel. If there is no any signals received within 5seconds, the LED will light and then exit code-learning state .
4. Code-removing: press and hold learning button (once you press learning button,LED is off), 5seconds later LED lights up, now the codes has been removed.

 

Aany question or you need DIY by yourself,please contact seller.If you are the installer of the gate, or your local dealer, welcome to contact the seller for cooperation, we deal at the best price
QQ20180319173518

jipig

01

SWING GATE OPERATOR
1. 2 SIDE terminal is used for connecting any external device that operates double
gate
2. COM terminal is COMMON used for connecting the “ground” of external devices
3. 1 SIDE terminal is used for connecting any external device that operates single gate
4. Swipe Card terminal is used for connecting any external devices that will operate to
open the gate
5. COM terminal is COMMON used for connecting the “ground” of external devices
6. Infrared terminal is used for connecting photo electric sensor
7. 12V DC output is used for connecting photo electric sensor (Continuous output
current <=200mA)
8. 24V battery output is used for connecting the back up battery +
9. 24V battery output is used for connecting the back up battery -
10. 24V DC output is used for connecting external device. (such as photo electric
sensor, max current output 1A)
11. GND is used for connecting the “ground” of external devices
12. 24V DC lamp output is used for connecting flash light +.
13. 24V DC lamp output is used for connecting flash light -.
14. 24V DC lock output—the NF terminal which used for connecting the electric lock
15. COM is COMMON used for connecting the “ground” of lock
16. 24V DC lock output—the NA terminal which used for connecting the magnetic
lock
17. 24V DC alarm output
18. 24V DC alarm output
19. and 20. Motor1 terminal is used for connecting the motor 1 installed on the gate
that opens later and close first. This terminal connect 1st red wire (counted from your
left hand side to right hand side)
21. and 22. Motor2 Delay terminal is used for connecting the motor 2 installed on the
gate that opens first and close later. This terminal connect 1st blue wire (counted
from your left hand side to right hand side). NOTE! If for single gate, the gate motor
just can connect the Motor2 Delay terminal.
23. AC24V input is used for connecting the transformer
24. AC24V input is used for connecting the transformer
25. digital display is used for showing you the setting data
26. INC+ is used for figure increase when setting the data
27. FUN is used for store the data
28. DEC- is used for figure decrease when setting the data
29. Learning button is used for program/remove remote

swing gate (5)swing gate (8)