4Axis cnc router Nema34 12N.m(1700oz in) 6A Stepper Motor 85BYGH450C 060 & Driver DQ860MA 80V 7.8A 256Micro

4Axis cnc router Nema34 12N.m(1700oz in) 6A Stepper Motor 85BYGH450C 060 & Driver DQ860MA 80V 7.8A 256Micro
  • Продавецguaranteedautos.us
  • Список ценUS $362.70piece
  • Продажная ценаUS $362.70piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,8 (981)

Oписание продукта

motor paso a paso HSS86 Hybrid Servo Driver NEMA34 Closed-Loop High Speed Stepper Servo Motor 12N.M 0~3000RPM CNC controller шаговый мотор моторчик шаговый двигательный

HSS86 is a two-phase hybrid stepper motor servo driver, adopting new 32-bit control technology and vector control technology that can prevent loss of movement synchronization and ensures accuracy. High-speed torque attenuation is far lower than the traditional open-loop driver, which can greatly increase high - speed performance and torque of stepper motor.Load-based current control technology can effectively reduce temperature rise of motor and prolong motor service life. Built-in position and alarm output signal is convenient for PC monitoring and controlling. Position out-of-tolerance alarm function ensures machining equipment safe operation.The driver is a great replacement for traditional open loop stepping driver and can replace part of traditional AC servo system.


  • The driver uses advanced 32-bit special motor control chip and vector closed-loop control technology.
  • Stepping closed-loop circuit system, no loss of movement synchronization.
  • Improve motor output torque and speed.
  • Current is adjusted depending on the load, reducing motor temperature rise.
  • Fit for all kinds of machinery load conditions (including low rigidity belt wheel and pulley) without adjusting the gain parameters.
  • Motor runs smoothly, vibrates mildly, and improves acceleration and deceleration dynamic performance.
  • Zero speed static ability of no vibration after completion of positioning.
  • Impulse response frequency is up to 200kHz.
  • Maximum 51200 steps/rotation, 16 kinds of optional segment.
  • It supports over current protection, over voltage protection, position out-of-tolerance protection.


Voltage: AC20V~80V

Peak Output Current: 8.0A (current changes along with load)

Logic Input Current: 7~20mA

Pulse Frequency: 0~200KHz

Encoder Lines: 1000
Insulation Resistance: >=500MΩ

Motor Rated Voltage: 70V

Motor Power: 250W

Motor Rated Speed: 0~3000rpm

Motor Torque: 12N.m

Terminal and Wiring:

1. Motor and Power Input





A phase motor coil+



A phase motor coil-



B phase motor coil+



B phase motor coil-



Input power supply



2. Encoder Input





Encoder B phase input +



Encoder B phase input -



Encoder A phase input +



Encoder A phase input -



Encoder power supply +(+5V)



Encoder power supply GND(0V)


(Incorrect encoder wiring will cause driver or encoder damage)

3.Control Signal





Pulse input +

If control signal level is 5V, no need to connect resistor to signal input;

If control signal level is 12V, a 1K resistor need to be connected to signal input in series;

If control signal level is 24V, a 2K resistor need to be connected to signal input in series.


Pulse input-


Direction input +


Direction input -


Enable input +


Enable input -


Pend output+

OC door output, close indication location is complete, open indication location is incomplete.


Pend output -


Alarm output +

OC door output, close indication has alarm signal, open indication has no alarm signal


Alarm output -

Indicator Light:
PWR: Power supply indicator. Green light is on when power on.
ALM: Malfunction indicator. Red light flashing once within 3 seconds indicates over-current or interphase short circuit; red light flashing twice within 3 seconds indicates over-voltage; red light flashing three times within 3 seconds indicates position out-of-tolerance protection.

Package Includes:

1 x Driver

1 x Motor

1 x Cable


1) We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.

2) Payment must be made within 3 days of order.

3) If you can\'t checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.   

About shipping

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
6. If you have not received your shipment within the period,  please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.

8. We seller are not in charge of import duty, buyer is responsible for that. Any dispute caused by this is unreasonable.

9. BR buyer please provide the cpf or cnpj, it will be better for you to get it more quickly. thanks

Return and Refund

1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
4.  We will bear all the shipping cost if the product(s) is (are) not as advertised.

About feedback

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
It is impossible to address issues if we do not know about them!